Category: Colorimetric Analyzers
The MicroMac C is designed to operate in an industrial or treatment works environment with minimal routine intervention and uses, wherever possible, industry standard chemistry methods.
The robust nature of the MicroMac C with its separate electronic and chemistry compartments (the latter including reagent storage) provides a highly reliable online analyser.
The chemistry module employs the patented Loop Flow Analysis System which results in a very flexible analysis system which can incorporate high temperature digestion or heating, UV digestion, acid digestion, and temperature controlled end point reactions all utilising either a visible light colorimeter or a fluorimeter.
Partech are the exclusive UK distributor for Systea Srl who are based in Rome, Italy. Partech have experienced, fully trained sales and service personnel.
|Dimensions (hxwxd)||800 x 450 x 300 mm|
|Power Supply||12 VDC or 115/230 VAC|
|Power Rating||4W on standby , 10W during analysis|
|Operating Temperature||10 to 30ºC|
|Location||Indoor or in Protective Kiosk|
|Display||Graphic Display providing access to setup menu and logged data|
|Analogue Output||4-20 mA, max load 500 ohm|
1x Process Alarm
1x General Fault Alarm
1x Calibration Error
|Principal of Operation||Colorimetric or Fluorimetric|
|Colorimeter||Dual Beam, Silicon Detector|
|Fluorimeter||Excitation at 370 nm, Emission 420-470 nm|
|Number of Parameters||
MP1 - Single Parameter
MP2 - Dual Parameter
MP3 - Three Parameters
MP4 - Four Parameters
|Measurement Frequency||Programmable, dependent on the parameter in use|
|Aluminium||0-500 µg/l to 0-5 mg/l|
|Ammonia||0-2 to 0-50 mg/l as N|
|Manganese||0-300 µg/l to 0-5 mg/l|
|Orthophosphate||0-500 µg/l to 0-50 mg/l as P|
|Soluble Iron||0-500 µg/l to 0-10 mg/l|
|Total Iron||0-5 mg/l as P|
|Total Phosphorus||0-500 µg/l to 0-5 mg/l as P|
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.