Endurance® High Temperature Infrared Pyrometers


Quantity: 1

Category: Fluke Process Instruments

Quick Overview:

Key Features 
Single color, two color and fiber optic models
Temperature range: 50 to 3200 °C (122 to 5792 °F)
Superior optical resolution to 300:1
Spot sizes down to 0.6mm (0.02 inch)
Fast response times down to 2 ms
Easy adjustment with manual variable focus integrated head optics
Through-the-lens sighting, with optional laser, LED or video aiming function
Compact, rugged housings with IP65 (NEMA-4) rating
Ethernet, Profinet and EtherNet/IP options
Programmable relay output for control
Simultaneous analog and digital outputs 

Product Overview

The Fluke Process Instruments Endurance® series has been designed to meet the requirements of modern industry that allows you to integrate with all major control systems quickly, easily and seamlessly.

The series are available in single color, two color and fiber optic Endurance models.

The innovative Endurance® Series of low-temperature and high-temperature two color pyrometers meets all requirements of modern industry: it is flexible and easy-to-install; durable to withstand the most demanding harsh industrial environments; visual – allowing you to see and understand your process temperature data.

The innovative optional camera feature for the integrated sensors allows you to continuously monitor your process visually, while the LED sighting option allows you to see the spot size on the target and make sure you have a clean line of sight to the target. The match function takes the guesswork out of setting the emissivity.

Endurance fiber-optic pyrometers allow measurement of targets that would otherwise be inaccessible because of space constraints or harsh environments. Separated by a flexible fiber-optic cable, the optical head may be positioned near the target with the rugged electronics housing installed remotely in a convenient location. Fiber-optic sensors are completely non-conductive and offer improved immunity to RFI and EMI interference.

Endurance companion software allows you to archive your process temperatures for data analysis and sensor setup.

Endurance meets the requirements of Digital Industry. It is designed to measure product temperature in the harshest of environments and communicate the results back to control system or monitoring stations. This stainless steel housed pyrometer can be specified with the widest range of communication interfaces from rugged analogue isolated input/output through to fast LAN/Ethernet and RS485.

The Endurance Series is supported by the best-in-class 4 year warranty.

 

Accessories

The SpotScan protective enclosure features:

  • Durable housing IP65 enclosure designed to survive in ambient temperatures up to 60°C (140ºF)
  • Air purge option available for use in dusty or dirty environments
  • Sighting achieved with the on board sensor via laser, through-the-lens sighting, LED or video function

The ThermoJacket protective enclosure features:

  • Rugged cast aluminum housing withstands ambient temperatures up to 315ºC (599ºF).
  • Thermal and mechanical environmental protection
  • Air/water cooling and air purge in one unit

Tag: #Endurance  #Endurance Fiber Optic 

Share: Messenger



Endurance Series Product Specifications


Endurance Integrated Pyrometers
Model / Spectral Response Temperature Range Optical
Resolution
Applications
E1RL
1.0 µm nominal
two color mode
600°C-1800°C

1112°F-3272°F

100:1
High temperature, more difficult processes: induction heating, vacuum furnaces, kilns, molten metals, thin wires or rods
E1RL
1.0 µm nominal
single color mode
550°C-1800°C

1022°F-3272°F

100:1
Same as above
E1RH
1.0 µm nominal
one/two color mode
1000°C-3200°C

1832°F-5792°F

150:1
Same as above
E2RL
1.6 µm nominal
one/two color mode
250°C-1200°C

482°F-2192°F

75:1
Medium temperature processes: induction heating, vacuum furnaces, kilns, molten metals, thin wires or rods
E1ML
1.0 µm nominal
single color mode
400°C-1740°C

752°F-3164°F

160:1
Semiconductor, metals forging, hardening & molten glass
E1MH
1.0 µm nominal
single color mode
540°C-3000°C

1004°F-5432°F

300:1
Same as above
E2ML
1.6 µm nominal
single color mode
250°C-1400°C

482°F-2552°F

160:1
Ferrous, non ferrous and unoxidized metals, galvanizing lines & steel annealing
E2MM
1.6 µm nominal
single color mode
250°C-1400°C

482°F-2552°F

160:1
Same as above
E2MH
1.6 µm nominal
single color mode
450°C-2250°C

842°F-4082°F

300:1
Small, low temperature targets, wire coating & annealing, plastic tubing extrusions
E3ML
2.4 µm nominal
single color mode
50°C-1000°C

122°F-1832°F

100:1
Same as above
E3MH
2.4 µm nominal
single color mode
150°C-1800°C

302°F-3272°F

300:1
Ferrous, non ferrous and unoxidized metals, galvanizing lines & steel annealing


Endurance Fiber-Optic Pyrometers
Model / Spectral Response Temperature Range Optical Resolution Applications
EF1RL
1.0 µm nominal one/two color

 
500°C-1100°C

932°F-2012°F
20:1
Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, lightbulb and halogen lamp production, cement and lime kilms, vacuum furnaces, thin wires or rods
EF1RM
1.0 µm nominal one/two color
700°C-1500°C

1292°F-2732°F
40:1
Same as above
EF1RH
1.0 µm nominal one/two color
1000°C-3200°C

1832°F-5792°F
65:1
Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, lightbulb and halogen lamp production, glass melting, cement and lime kilms, vacuum furnaces, thin wires or rods
EF2RL
1.6 µm nominal one/two color
275°C-1000°C

527°F-1832°F
20:1
Metals processing, molten metal forging, heat treating and annealing, induction heating, cement and lime kilms, vacuum furnaces, thin wires or rods
EF2RH
1.6 µm nominal one/two color
350°C-1300°C

662°F-2372°F
40:1
Metals processing, molten metal forging, heat treating and annealing, induction heating, cement and lime kilms, vacuum furnaces, thin wires or rods
EF1ML
1.0 µm nominal single color
475°C-900°C

887°F-1652°F
20:1
Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, glass melting, semiconductor furnaces
EF1MM
1.0 µm nominal single color
800°C-1900°C

1472°F-3452°F
100:1
Same as above
EF1MH
1.0 µm nominal single color
1200°C-3000°C

2192°F-5432°F
100:1
Same as above
EF2ML
1.6 µm nominal single color
250°C-800°C

482°F-1472°F
20:1
Ferrous and non-ferrous metals, galvanizing lines, metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating
EF2MH
1.6 µm nominal single color
400°C-1700°C

752°F-3092°F
40:1
Same as above
 


How-To: Install Fluke Process Instruments Endurance Software

Endurance Series Ratio IR Pyrometers

How-To: View and change parameters on the Endurance sensor

Endurance Roadshow

How-To: Set up and use graphs within the Endurance Software

Endurance® High Temperature Infrared Pyrometers


Please Leave Your Product Enquiry Here. We will Get Back To You Soon.

Product Specifications

  • Product SKU : -
  • Weight (GRAM) : -
  • Dimension : -